sidebar hamburger menu

ePortal

TuxCare ePortal is the web management console dedicated to KernelCare Enterprise live patch management.

ePortal software can help protect servers located behind the firewall (i.e. with no internet access) and can be installed both on-premises and in the cloud.

Overview

ePortal Hardware Requirements

Disk:

  • 100 GB minimum, 200 GB recommended (20GB in case of cache mode)
  • SSD with at least 100 IOPS

Note

SSD based storage is a crucial requirement for ePortal server.

CPU:

As far as other requirements concerned, we have tested the following configuration and the following number of connected servers:

  • 10k of connected machines is the maximum for the following requirements:

    • VM
    • 1 VCPU
    • 1 GB RAM
  • 75k of connected machines is the maximum for the following requirements:

    • Core i5
    • 1 CPU
    • 4 GB RAM

Installation

Note

If you are installing for the first time, please confirm with our sales engineering team at sales@tuxcare.com BEFORE trying the installation via the documentation below. Please note that support tickets resulting from not following this recommendation will not be accepted.

ePortal is compatible with 64-bit versions of EL7/8/9 based distros like CentOS 7/8, AlmaLinux 8/9 and Ubuntu 20.04/22.04

RHEL-based distros

For installation and workability of ePortal the Nginx web server is required. We recommend to use stable version from the official Nginx repository:

# cat > /etc/yum.repos.d/nginx.repo <<EOL
[nginx]
name=nginx stable repo
baseurl=http://nginx.org/packages/centos/\$releasever/\$basearch/
gpgcheck=1
enabled=1
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true
EOL

You can find more information at https://nginx.org/en/linux_packages.html#stable

Setup ePortal repo:

# cat > /etc/yum.repos.d/kcare-eportal.repo <<EOL
[kcare-eportal]
name=KernelCare ePortal
baseurl=https://www.repo.cloudlinux.com/kcare-eportal/\$releasever/\$basearch/
enabled=1
gpgkey=https://repo.cloudlinux.com/kernelcare/RPM-GPG-KEY-KernelCare
gpgcheck=1
EOL

Note

If you are using CentOS7, starting from ePortal version 2.4-2, it's necessary to install the centos-release-scl package. You can do so with the following command:

# yum install centos-release-scl

For RHEL7 users, you'll need to enable the necessary repositories to ensure access to the required packages. Use the subscription-manager utility with the following commands:

# subscription-manager repos --enable rhel-7-server-optional-rpms
# subscription-manager repos --enable rhel-server-rhscl-7-rpms

For Oracle Linux 7 users, similar to CentOS7, you need to install the oracle-softwarecollection-release-el7 package. This can be done using the following command:

# yum install oracle-softwarecollection-release-el7

Install ePortal:

# yum install -y kcare-eportal

Ubuntu 20.04

Setup ePortal repo:

# apt-get install -y --no-install-recommends curl ca-certificates

# curl https://repo.cloudlinux.com/kernelcare/kernelcare.gpg -o /usr/share/keyrings/kcare-eportal.gpg

# cat > /etc/apt/sources.list.d/kcare-eportal.list <<EOL
deb [signed-by=/usr/share/keyrings/kcare-eportal.gpg] https://repo.cloudlinux.com/kcare-eportal/20.04 focal main
EOL

Install ePortal:

# apt-get update && apt-get install -y --no-install-recommends kcare-eportal

Ubuntu 22.04

Setup ePortal repo:

# apt-get install -y --no-install-recommends curl ca-certificates

# curl https://repo.cloudlinux.com/kernelcare/kernelcare.gpg -o /usr/share/keyrings/kcare-eportal.gpg

# cat > /etc/apt/sources.list.d/kcare-eportal.list <<EOL
deb [signed-by=/usr/share/keyrings/kcare-eportal.gpg] https://repo.cloudlinux.com/kcare-eportal/22.04 jammy main
EOL

Install ePortal:

# apt-get update && apt-get install -y --no-install-recommends kcare-eportal

Allowed hosts

We must declare the list of allowed hosts in the configuration for security reasons. It help to avoid HTTP Host header attacks. According to your installation, you need to add this parameter into ePortal config file:

ALLOWED_HOSTS = ['node1-yourdomain.example.com', 'node2-yourdomain.example.com']

Instead of an example, use the DNS name(s) of your ePortal server installation. Default value is [].

Cache mode

Cache mode allows to greatly reduce disk usage requirements and speed up initial downloading step.

In cache mode ePortal downloads only lightweight meta information about patchsets and proxies patch requests from KernelCare agent to the patch server (Patch Source). Downloaded patch binaries are cached for 2 weeks and accessible for following requests directly from ePortal and doesn't consume public internet bandwidth.

Cache mode

Enable cache mode

  1. add the following setting into the ePortal config file:
CACHE_MODE = True
  1. restart ePortal:
# systemctl restart eportal

For existing installations you have to refetch meta info for existing patchsets:

# kcare/kc.eportal cache-mode --fetch-meta

Disable cache mode

  1. remove or comment the line below in the ePortal config file:
CACHE_MODE = True
  1. download missing patchests:
# kcare/kc.eportal kcare download-missing
  1. restart ePortal:
# systemctl restart eportal

Proxy configuration

ePortal can fetch packages and patches via a customer's proxy server.

Proxy

On the ePortal machine, you should define the same proxy settings as you use on the command line.

To do so, add PROXY = 'http://example.com:3128' into the ePortal config file:

# echo "PROXY = 'http://example.com:3128'" >> /etc/eportal/config

ePortal also supports a SOCKS5 proxy via socks5:// proxy scheme:

# echo "PROXY = 'socks5://example.com:1080'" >> /etc/eportal/config

Restart ePortal (see the Stopping & Starting section, choose a corresponding OS).

Auth configuration

SettingDescription
AUTH_RESTRICTED_INDEXAllow access to the index page only for registered users
AUTH_PASSWORD_MIN_LENGTHMinimal password length, default 5
AUTH_SESSION_LIFETIMESession lifetime in seconds, by default session will last till browser closing
AUTH_REFRESH_SESSIONIf False (default), expires session after lifetime seconds after login. If True, expires session after lifetime seconds of inactivity.

You can set configuration in ePortal config file.

Managing Users

You can manage portal using kc.eportal user utility:

usage: kc.eportal user [-h] [-a] [-c] [-d] [-p PASSWORD] [-r {admin,readonly}] [--note NOTE] [user]

list available users by default

positional arguments:
  user                  user name

optional arguments:
  -h, --help            show this help message and exit
  -a                    action: add new user
  -c                    action: change user
  -d                    action: delete user
  -p PASSWORD, --password PASSWORD
  -r {admin,readonly}, --role {admin,readonly}
  --note NOTE           description

To add a user:

# kc.eportal user -a -p AdminPassword admin

To change user's password:

# kc.eportal user -c -p NewPassword admin

Set user as read-only:

# kc.eportal user -c -r readonly admin

Authentication using LDAP

ePortal supports LDAP authentication via bind operation. Every user should have a DN with an ability to perform bind request. ePortal doesn't sync users so you don't need to set special DN/password to access LDAP server.

Configuration

LDAP configuration settings are available inside the Settings / LDAP navigation item.

URL

Specifies host, port, and protocol of the LDAP server to connect to.

Format: <scheme>://<host>[:port][?params]

  • scheme:
    • ldap: a verified encrypted TLS connection, you can specify tls=0 to use an insecure connection;
    • ldaps: an SSL connection;
  • host: hostname or ip of your LDAP server;
  • port: custom port, by default 389 for ldap and 636 for ldaps scheme;
  • params:
    • strict_check=0: enable/disable strict SSL certificate verification (enabled by default);
    • tls=0: enable/disable TLS handshake on connect (enabled by default);
    • timeout=30: LDAP server connection timeout (in seconds, 5 by default).

For example:

  • ldap://ldap.forumsys.com?tls=0&timeout=30: use insecure connection with 30s connection timeout.

Connection String (DN template)

Connection string is a DN template used in LDAP bind operation. All %s template placeholders will be replaced with the username from the login form. For example: uid=%s,dc=example,dc=com

Some LDAP implementations support additional templates for bind requests:

  • Active Directory accepts the %s@example.com template;
  • cn=%s,dc=example,dc=com or email=%s,dc=example,dc=com can be also valid.

Filter

Filter is an optional setting which specifies parameters for an additional LDAP search request to limit users who have access to ePortal. Usually it is a check of a group a user belongs to. If the search returns a non-empty result the user will be considered authenticated.

Format: <base>??<scope>?<filter>, is a part of The LDAP URL Format RFC

  • base: a search base, a root node to perform search from;
  • scope: a search scope;
    • base: search only for base (default);
    • one: search for direct ascendants only (one level deep from base);
    • sub: search in whole tree;
  • filter: search filter to apply.

For example: dc=example,dc=com??one?(&(ou=mathematicians)(uniqueMember=uid=%s,dc=example,dc=com))

Note

You can use a %s placeholder in the Filter setting as well. It will be replaced with the username from the login form.

Login process

When a user logs in to ePortal, ePortal checks the user credentials in the local database at first. If the credentials are found, the user will be authenticated, and only if the user credentials are not found, ePortal redirects to LDAP.

When you log in to ePortal with your LDAP credentials for the first time, a user with LDAP username, read-only permissions, and LDAP description is created in the database by default (https://<eportal>/admin/user/).

In the picture, you can see one user created with kc.eportal command line interface and two users logged in with LDAP credentials:

ldap users

Note

All fresh LDAP users have read-only permissions. You can set admin rights on User edit page by turning off Readonly field.

Basic setup example

The following examples are based on the public test LDAP server ldap.forumsys.com

Here is a list of our users:

~$ ldapsearch -H ldap://ldap.forumsys.com -LLL -x -b 'dc=example,dc=com' '(objectClass=person)' dn
dn: uid=tesla,dc=example,dc=com
dn: uid=gauss,dc=example,dc=com
...

Basic setup only checks if the provided username/password can bind to your directory service. Note: all fresh users have read-only permission so you can safely allow them to login into eportal and set correct permissions individually.

For a basic setup you should fill Url and Connection string settings:

SettingValue
URLldap://ldap.forumsys.com?tls=0
Connection stringuid=%s,dc=example,dc=com

After that you can login using gauss:password or tesla:password credentials.

Filter setup example

Filter allows you to limit a set of users permitted to login into ePortal, for example users belonging to the mathematicians group.

Here are our example groups:

~$ ldapsearch -H ldap://ldap.forumsys.com -LLL -x -b 'dc=example,dc=com' '(objectClass=groupOfUniqueNames)' dn
dn: ou=mathematicians,dc=example,dc=com
dn: ou=scientists,dc=example,dc=com
...

And mathematicians group attributes:

~$ ldapsearch -H ldap://ldap.forumsys.com -LLL -x -b 'dc=example,dc=com' '(ou=mathematicians)'
dn: ou=mathematicians,dc=example,dc=com
uniqueMember: uid=euclid,dc=example,dc=com
uniqueMember: uid=riemann,dc=example,dc=com
uniqueMember: uid=euler,dc=example,dc=com
uniqueMember: uid=gauss,dc=example,dc=com
uniqueMember: uid=test,dc=example,dc=com
ou: mathematicians
cn: Mathematicians
objectClass: groupOfUniqueNames
objectClass: top

ePortal LDAP settings to limit allowed users:

SettingValue
URLldap://ldap.forumsys.com?tls=0
Filterdc=example,dc=com??one?(&(ou=mathematicians)(uniqueMember=uid=%s,dc=example,dc=com))
Connection stringuid=%s,dc=example,dc=com

The filter idea is to find the mathematicians group which has an attribute uniqueMember equal to DN of our user who tries to login. After that you can login using gauss:password but not tesla:password credentials.

Accessing ePortal

To access KernelCare.eportal management console, connect to http://YOUR_IP/admin and enter your login & password.

login screen

You can manage your login information using the kc.eportal tool

PatchSet deployment

ePortal has a built-in mechanism to download the latest patches. To start using it, click the Settings link in the ePortal navigational bar and then click Patch Source. To get access, please contact sales@tuxcare.com and request your ePortal access credentials.

patch source

You can choose only a limited set of distros to fetch to reduce disk space and network bandwidth requirements. Once you set up patch source access info, you will get to a list of available patchsets.

dashboard

  • Usage: amount of servers using particular patchset on any feed. You can click on the number to see a list of servers using the patchset.

  • Patchsets: name of the patchset. Click on a name will show patchset changelog.

  • Feed name: cells show patchset deployment and server usage status on particular feed. Numbers are also clickable to filter server list.

  • Manage: opens dialog to enable/disable the patchset.

Manage patchset page

manage patchsets

In this dialog you can control which patchsets will be enabled/disabled on corresponding feeds.

  • Enable all up to this patchset: action will enable all patchsets (excluding disabled) up to this patchset.

  • Enable: action will enable only current patchset.

  • Disable: action will disable only current patchset. Disabled patchsets are immune to auto-update and mass-enabling via Enable all up to this patchset action.

To unroll a patchset from the CLI, run:

# kc.eportal --unroll 16012017_1

Automatic updates

You can configure automatic updates by enabling Autoupdate on the desired feeds via Settings -> Feeds.

Note

The default feed cannot be configured via the Settings page to receive automatic updates. See the next section on configuring automatic updates for the default feed.

Automatic updates on default feed

It is possible to configure automatic updates on the default feed by creating a cron job. The following commands can be used to receive these updates.

The command below determines if the latest patches are available and installs them to the default feed:

# kc.eportal --get-latest

Script to deploy release from a file

If you have no opportunity to connect your ePortal server to the KernelCare patch server to download patchsets directly from it, you can do it manually.

If you have a location with already downloaded patchsets, and would like to identify the latest patchset file to be moved, you can compare the lists of archives you have with the content of the /usr/share/kcare-eportal/arch/ folder.

After that, upload the selected patchsets to your ePortal server and run the kc.eportal --deploy command for each of them.

Example

Lets find out the difference between a test and a production ePortal instances:

$ comm -23 \
    <(ssh eportal-test "ls /usr/share/kcare-eportal/arch/K*.tar.bz2" | sort -h) \
    <(ssh eportal-prod "ls /usr/share/kcare-eportal/arch/K*.tar.bz2" | sort -h) | tee patchsets.diff

Upload patchsets to the production:

$ cat patchsets.diff | xargs -Phav {} rsync -iv eportal-test:{} /tmp/
$ rsync -Phav /tmp/K*.tar.bz2 eportal-prod:/tmp/

Run the deployment tool with patchset file name as a parameter:

$ ssh eportal-prod 'ls /tmp/K*.tar.bz2 | sort -h | xargs -n1 kc.eportal kcare deploy'
2021-12-02 01:25:06,555 - eportal.patches - INFO - K04082020_1 was enabled in main
...

Note

Please note that procedure above should be done for all other types of patchsets (like libcare and qemu) separately. Use corresponding file prefixes and commands like kc.eportal libcare deploy.

Clean obsolete releases

The list of provided patches is reduced once in a month (old patches that have newer versions are removed), but resources are not deleted from ePortal machine. The control of resource deletion is in charge of the ePortal administrator. To free disk space on ePortal old release resources could be removed.

To check what releases will be removed:

# DRY_RUN=1 kc.eportal --clean-releases

To remove obsolete releases:

# kc.eportal --clean-releases

LibCare PatchSet Deployment

Starting from version 1.18, ePortal supports the LibCare patchset management. It is accessible from the Patches / LibCare navigation item. LibCare patches use the same Patch Source credentials, and you don't need to perform additional configuration.

libcare feed

CLI to install the latest patchsets

To update the default feed, run the following command:

# kc.eportal libcare update

To update the test feed, run the following command:

# kc.eportal libcare update --feed test

To update all auto-feeds, run the following command:

# kc.eportal libcare auto-update

CLI to deploy patchset from archive

~$ kc.eportal libcare deploy --help
usage: kc.eportal libcare deploy [-h] [--feed FEED] [--disabled] archive

positional arguments:
  archive      path to archive

optional arguments:
  -h, --help   show this help message and exit
  --feed FEED  feed to deploy archive to
  --disabled   do not enable patchset after deploy

For example:

# kc.eportal libcare deploy --feed test /tmp/U20210129_02.tar.bz2

This command will deploy and enable the U20210129_02 patchset in to the test feed.

QEMU PatchSet Deployment

Starting from version 1.25, ePortal supports the QEMU patchset management. It is accessible from the Patches / QEMUcare navigation item. QEMU patches use the same Patch Source credentials, and you don't need to perform additional configuration.

qemu feed

Command to install the latest patchsets

To update the default feed, run the following command:

# kc.eportal qemu update

To update the test feed, run the following command:

# kc.eportal qemu update --feed test

To update all auto-feeds, run the following command:

# kc.eportal qemu auto-update

Command to deploy patchset from archive

~$ kc.eportal qemu deploy --help
usage: kc.eportal qemu deploy [-h] [--feed FEED] [--disabled] archive

positional arguments:
  archive      path to archive

optional arguments:
  -h, --help   show this help message and exit
  --feed FEED  feed to deploy archive to
  --disabled   do not enable patchset after deploy

For example:

# kc.eportal qemu deploy --feed test /tmp/U20210818_01-qemu.tar.bz2

This command will deploy and enable the U20210818_01-qemu patchset in to the test feed.

Managing Keys

To register new servers you need to create a KernelCare key that will be used for server registration. To go to the list of keys, click the Keys navigation item.

keys

  • To edit a key, click edit keys. The Edit tab opens.
  • To remove a key, click remove keys. Please note, that removing the key would remove all servers under that key.
  • Click a key to go to Servers tab with the list of servers registered under that key. You can also remove servers on that tab.

To create a new registration click Create tab.

create key

Fill in the following fields:

  • Key - you can provide a key value or leave the field empty, so an automatically generated key will be used
  • Description - you can provide a description for the key
  • Server Limit - the amount of servers that can be registered under that key
  • Feed - select a specific feed or leave empty.
  • Products - limit allowed products can be used with the key.

Available products:

  • KernelCare/LibCare/QemuCare/DBCare: allow only patches of selected type.
  • Enterprise Support for AlmaLinux - ESU: allow access to the Extended Security Updates and FIPS repositories.

Products can be mixed to limit access to a particular set of patch types. For example:

  • KernelCare + LibCare: allow access only to kernel and lib patches.

For Enterprise Support for AlmaLinux deployment instructions please see the dedicated section

Click Save to add the key. The new registration key will be created and added to the list. The key itself will be used as a part of the registration command on an individual server.

Click Save and Add Another to save this key and add one more key.

Click Save and Continue Editing to add the key and open the key edit tab.

Click Cancel to return to the key list tab without adding a new key.

CLI to manage keys

~$ kc.eportal key --help
usage: kc.eportal key [-h] [-a] [-c] [--note NOTE] [--server-limit SERVER_LIMIT] [--feed FEED]
                      [--product {tuxcare-repo,db,kernel,libcare,qemu}] [--default-products]
                      [key]

list available keys by default

positional arguments:
  key                   key name

optional arguments:
  -h, --help            show this help message and exit
  -a                    action: add new key
  -c                    action: change key
  --note NOTE           key description
  --server-limit SERVER_LIMIT
                        maximum number of servers allowed
  --feed FEED           feed to associate key to
  --product {tuxcare-repo,db,kernel,libcare,qemu}
                        products available for the key, can be specified multiple times
  --default-products    set default product list (KernelCare, LibCare, DBCare, QEMUCare) for the key

List keys:

# kc.eportal key

Autogenerate key:

# kc.eportal key -a

Create key with specified value:

# kc.eportal key -a test

Set feed to key:

# kc.eportal key -c test --feed test

Managing Servers

You can see servers belonging to the key by clicking on the key itself in the Managing Keys interface.

server list

The screen shows servers registered under the key, their IP, hostname, effective kernel as well as the time of registration and last check in.

To view the list of all servers IDs that are connected to the particular key, do the following:

  • In the UI go to the page with the list of keys. Then click the particular key. The list of servers connected to this key will be displayed.

To view the list of all servers IDs that are not connected to any key, use the Servers button on the navigation bar.

eportal servers

Also you can use CLI to see pairs of key/number of servers run:

$ kc.eportal --list-servers
Count | Key
----- + --------------------------------
    0 | 2shcolu7Y1x6885Q
    2 | 6J89aS44j6OmTr05

Clean inactive servers

Servers inactive for more than 30 days can be removed using the followed command:

# kc.eportal server clean --inactive
2 servers were deleted

Clean-up of inactive servers can be performed automatically every day or rarer. To enable daily auto clean-up, you can add an option CLEAN_INACTIVE_SERVERS_PERIOD = 3600 * 24 (value in seconds) in the ePortal config file

Show extended check-in statistics in admin UI

A new table is added to the starting page. This table displays the following:

  • Total number of servers.
  • Number of servers that checked in for the past 48 hours.

The number of servers for each key is listed on the Keys page.

Feed Management

Feeds are intended to manage patchsets on the server, and they provide a possibility to bind a set of patches to a specific key. Possible use cases: for preliminary testing of patches, for applying updates to groups of servers with the similar hardware, etc.

To get into Feeds Management interface go to Settings -> Feeds:

feeds

On this page a user can manage the existing feeds: create, delete, edit.

feed menu

Available options:

  • Name - a name of a feed.

  • Auto update - enable and disable automatic downloading of patches to this feed.

  • Deploy after X hours - a delay in hours between the moment the patchset is available for deployment and the moment it is installed to the feed.

  • Channel - a patch channel to use.

    • Stable: (default) stable patchsets marked with eportal label on the patch server.
    • Testing: all patchsets available on the patch server.
    • Unstable: patches from early-access feed (not recommended).

Every 10 minutes ePortal checks for new patches on the main patch server. If a new patch is available, it is uploaded to the ePortal server. Note: it is uploaded but is not deployed. The patch availability time is considered starting from the moment a new patch appears on the ePortal, and that time is taken into account in Deploy after X hours option. So, if a user sets Deploy after X hours = 10, the patch will be deployed to the feed 10 hours after it has been downloaded to the ePortal server.

To make the feed auto-update immediately, so new patches are loaded to the feed immediately after they are available on ePortal, set Deploy after X hours = 0.

A special case is a clean installation when ePortal is installed on a new server (there aren't any downloaded archives with patches and feeds with deployed patchsets, including default feed). In this case, if a user creates a new feed and sets Deployed after X hours option right away, then all patches (from the oldest to the latest available) will be deployed to the feed after the specified X hours. This is because the archives are downloaded from scratch and will be considered as "just appeared on ePortal" - that is, all patches will have the same appearance time on ePortal from which the option Deploy after X hours will repel.

feed management

On the main ePortal page, a user can set the corresponding key <> feed pair. This is done in the key creation interface or when editing a key.

edit key

By default, a new key is bound to the default feed, alternatively, a user can choose a desired feed from the drop-down menu.

feed list

Note

When removing a feed all keys attached to this feed will be moved to the default feed.

delete feed

CLI to manage feeds

~$ kc.eportal feed --help
usage: kc.eportal feed [-h] [-a] [-c] [--auto] [--no-auto] [--deploy-after hours]
                       [--channel {default,test}] [feed]

list available feeds by default

positional arguments:
  feed                  feed name

optional arguments:
  -h, --help            show this help message and exit
  -a                    action: add new feed
  -c                    action: change feed
  --auto                update feed automatically
  --no-auto             don't update feed automatically
  --deploy-after hours  deploy after specified hours
  --channel {default,test}
                        patchset channel to use for this feed

List feeds:

$ kc.eportal feed

Add auto updated feed:

# kc.eportal feed -a test --auto

Change feed into delayed feed:

# kc.eportal feed -c test --deploy-after 12

Adding extra Tag field

To add an extra Tag field for the server, run:

# kcarectl --tag command

where command is a parameter defined by a user. This parameter will be displayed in UI for the server. User could add multiple tags for each server. Each tag should be separated with ; symbol.

Example:

# kcarectl --tag "env:prod;ubuntu"

This server has two tags : env:prod and ubuntu.

env:prod is a parameter that has tag name env and the value prod.

tags

To remove all tags from a particular server, run:

# kcarectl --tag ""

Where "" is a parameter to delete the previously defined tag.

How to setup ePortal to use HTTPS

Some assumptions for a server where e-portal is deployed:

Terminate TLS on ePortal public nginx web server

  1. A firewall allows connections to 443 port.
  2. Private and public keys are downloaded on the server.
  • Edit SSL configuration template according to your certificates:
# mv /etc/nginx/eportal.ssl.conf.example /etc/nginx/eportal.ssl.conf
# vi /etc/nginx/eportal.ssl.conf
  • Include this configuration into the main one:
# sed -e '3iinclude eportal.ssl.conf;' -i /etc/nginx/conf.d/eportal.conf
  • Restart nginx:
# service nginx restart

Terminate TLS on external balancer

You can use any reverse proxy server of choice to terminate TLS traffic and forward requests to ePortal instance. The only requirement is to provide correct Host and X-Forwarded-Proto headers.

For example balancer nginx config:

server {
   listen       443 ssl;
   server_name  your-eportal-domain;

   # ssl stuff ...
   # ssl_certificate  ...
   # ssl_certificate_key ...

   location / {
      proxy_pass http://eportal-instance-address;
      proxy_set_header Host $http_host;
      proxy_set_header X-Forwarded-Proto https;
   }
}

Update agent configuration

In order to communicate with e-portal, updated to https, you need to modify KernelCare configuration file on all the servers if they have IPs hard coded servers settings.

To do that, update PATCH_SERVER and REGISTRATION_URL options:

# vi /etc/sysconfig/kcare/kcare.conf

So, after editing your /etc/sysconfig/kcare/kcare.conf should contain updated PATCH_SERVER and REGISTRATION_URL environment variables like in the example below:

PATCH_SERVER=https://eportal_domain_name/
REGISTRATION_URL=https://eportal_domain_name/admin/api/kcare

As an alternative you can use ePortal's special endpoint to update patch server address:

# curl -s https://eportal_domain_name/set-patch-server | bash

High availability

Starting from version 1.28, ePortal supports application level replication. It allows to propagate changes in both ways – from a leader to followers and from followers to the leader.

Configuration settings related to replication and can be changed in ePortal config file:

  • NODE_URL: URL to the self instance, needed for auto-discovery purposes
  • LEADER_URL: URL to the instance from where to fetch changes
  • REPLICATION_SHARED_KEY: authorization key to access the replication data
  • REPLICATION_CHECK_CERT: use strict TLS cert check for replication requests. It can be useful to deploy self signed certificates on replicas and get encrypted replication traffic without getting proper TLS certificate.
  • REPLICATION_CLEAN_AGE: data age in seconds to leave during oplog cleanup. 7 days by default.
  • REPLICATION_CLEAN_AGGRESSIVE_AGE: data age in seconds to leave during oplog cleanup for not-important operations. 1 hour by default.

A leader node discovers followers automatically and after that fetches the changes.

You can use any convenient way to balance agent requests to the ePortal cluster. For example, you can add multiple IP addresses to the DNS name or use an HTTP balancer.

Basic setup

  1. Prepare two fresh ePortal instances and assign DNS name to IPs. For example:

    • eportal1.corp -> 192.168.1.11
    • eportal2.corp -> 192.168.1.12
    • eportal.corp -> 192.168.1.11, 192.168.1.12
  2. Let's choose eportal1 as a leader and eportal2 as a follower. eportal.corp is a cluster hostname to use on servers with KernelCare agent.

    Warning!

    Please do not use a cluster hostname to perform operations with the ePortal admin UI.

  3. On the eportal1 define NODE_URL and REPLICATION_SHARED_KEY in the configuration file:

NODE_URL = 'http://eportal1.corp'
REPLICATION_SHARED_KEY = 'secret'
  1. On the eportal2 define NODE_URL, LEADER_URL and REPLICATION_SHARED_KEY:
NODE_URL = 'http://eportal2.corp'
LEADER_URL = 'http://eportal1.corp'
REPLICATION_SHARED_KEY = 'secret'
  1. That's it. After ePortal restart on both hosts, changes on the eportal1 will be replicated to the eportal2 instance and vice versa.

Note

You can change the KernelCare agent settings to point to a cluster hostname via:

# curl -s http://eportal.corp/set-patch-server | bash

Adding node to an existing ePortal instance

If you already have a working ePortal instance, you can setup a second node, define NODE_URL and LEADER_URL on both instances and trigger full sync on the follower instance:

[root@eportal2.corp]$ kc.eportal replication --full-sync

Monitoring

You can use kc.eportal replication --short-status CLI command to check replication status. It exits with code 1 if there are some issues with replication and outputs JSON:

{
  "ok": true,       // overall health status
  "lag": 1,         // overall replication lag in seconds
  "last_sync": 1,   // overall sync delta in seconds (how many seconds ago was successful communication with an upstream)
  "upstream": {     // per upstream metrics
    "node2": {
      "ok": true
      "lag": 1,
      "last_sync": 1,
    },
    "node3": {
      "ok": true
      "lag": 1,
      "last_sync": 1,
    }
  }
}

Other replication setups

For one leader and two follower setup:

     +-> leader <-+
     |            |
     |            |
follower1       follower2

there is a chance to lose a leader node and follower1/follower2 will not communicate with each other. To mitigate this issue, you can deploy a ring replication:

  +-> node1 --+
  |           |
  |           v
node2 <---- node3

where each instance follows another node.

Caveats

  1. Replication uses HTTP transport. If you deploy ePortal without SSL termination, the replication data will be transferred as-is unencrypted.

  2. For a round-robin balancer setups (DNS or HTTP balancer round-robin) KernelCare agent can run onto replication lag in case of sequential registration and following update. You can introduce 10s timeout or repeat in your configuration management logic to mitigate the issue.

  3. Replication log is kept for 7 days. If a node loses connectivity for more than 7 days it skips some changes.

Deploying KernelCare Enterprise

You can find instructions to install KernelCare agent on http://your-eportal-domain/admin/docs/.

To install agent through ePortal you can use special endpoint http://your-eportal-domain/install-kernelcare:

# export KCARE_MAILTO=admin@mycompany.com
# curl -s http://eportal.mycompany.com/install-kernelcare | bash
# kcarectl --register my-key

Exporting KCARE_MAILTO is an optional step, it helps to configure corresponding entry in /etc/cron.d/kcare-cron to receive all notifications related to failed KernelCare updates.

KernelCare Enterprise client config file

KernelCare Enterprise client configuration file is located in /etc/sysconfig/kcare/kcare.conf

Example:

AUTO_UPDATE=True
PATCH_SERVER=http://10.1.10.115/
REGISTRATION_URL=http://10.1.10.115/admin/api/kcare

If AUTO_UPDATE set to True, KernelCare client will check in every 4 hours, and try to download and apply latest patches

PATCH_SERVER - server from which patches will be downloaded

REGISTRATION_URL - URL used to register/unregister server

Deployment Automation

It is possible to use automation tools like Ansible/Puppet/Chef/Salt to install and operate KernelCare on a big number of systems.

The deployment process includes:

  • Running http://your-eportal-domain/install-kernelcare script. You can pre-download it (verify checksum) or directly execute curl -s http://your-eportal-domain/install-kernelcare | bash.
  • Registering KernelCare agents using an activation key

Ansible

To start the automated deployment, you need to specify the following information:

  • ePortal server name (or IP) in the eportal_srv Ansible variable. Other config file options can be found at Config Options and KernelCare client config file (ePortal).

  • an activation key in the activation_key Ansible variable. Activation keys can be generated in ePortal as described in Managing Keys (ePortal).

Ansible playbook for deployment phase may look like:

- hosts: kernelcare
  vars:
    eportal_srv: http://192.168.250.19
    activation_key: my-key
  tasks:
    - name: Download the installation shell script
      get_url:
        url: "{{ eportal_srv }}/install-kernelcare"
        dest: /root/kc-install.sh
        mode: '0700'

    - name: Run the installation shell script
      command: /root/kc-install.sh

    - name: register KernelCare agents
      command: /usr/bin/kcarectl --register {{ activation_key }}

Ansible playbook file example for KernelCare agent removal:

- hosts: kernelcare
  tasks:
    - name: unregister KernelCare agents
      command: /usr/bin/kcarectl --unregister
      ignore_errors: yes
      args:
        removes: /usr/bin/kcarectl

    - name: remove kernelcare package
      package:
        name: kernelcare
        state: absent

Changing ePortal IP/domain

You can change ePortal address at any moment by calling two special endpoints on hosts with KernelCare agent:

# curl -s http://your-eportal-domain/set-kernelcare-repo | bash
# curl -s http://your-eportal-domain/set-patch-server | bash
  • set-kernelcare-repo configures new package repo to download agent updates through ePortal.
  • set-patch-server configures new address of patch server.

Deploying Enterprise Support for AlmaLinux

You can find instructions on how to set up Enterprise Support for AlmaLinux on http://your-eportal-domain/admin/docs/

tuxctl is the setup tool for TuxCare's Extended Security Updates product for AlmaLinux. To set up tuxctl through ePortal you can use a special endpoint http://your-eportal-domain/install-tuxcare:

# curl -s http://eportal.mycompany.com/install-tuxcare | bash
# tuxctl --license-key my-key

Where my-key should have the Enterprise Support for AlmaLinux - ESU product enabled.

Migrate ePortal

Here is a procedure to migrate feed/server/key configuration and patches data from one ePortal to another. ePortal version on a new host should be >=1.18 and equal or greater than on an old host.

If you migrate from Debian-based to Debian-based system you can simply:

  • Stop ePortal on both hosts.
  • Copy /var/lib/eportal to a new host. Note: directory owner must stay as eportal:eportal.
  • Copy config /etc/eportal/config if it exists.
  • Run migration /usr/share/kcare-eportal/migratedb.py --upgrade on a new host.
  • Start ePortal on a new host.

Migration from RHEL-based distro is more elaborate. Later we refer to a $BASE_DIR variable in scripts. You can export it for RHEL-based distros:

# export BASE_DIR=/usr/share/kcare-eportal

or for Debian-based distros:

# export BASE_DIR=/var/lib/eportal

or for docker-based installation use corresponding data directory. For example if you run a container as docker run -v /var/lib/eportal/data:/var/lib/eportal/data kernelcare/eportal use /var/lib/eportal/data as $BASE_DIR:

# export BASE_DIR=/var/lib/eportal/data
  • Stop ePortal on both hosts:
  [old-host ~]# systemctl stop eportal
  [new-host ~]# systemctl stop eportal
  • Remove db files on a new host:
[new-host ~]# rm $BASE_DIR/*.sqlite*
  • Copy database files $BASE_DIR/*.sqlite* from an old host to a new host.

  • (Optional) copy runtime LDAP and Feed Source settings $BASE_DIR/config/config.json.

  • (Optional) copy ePortal web app settings /usr/share/kcare-eportal/config/local.py or for new ePortal /etc/eportal/config to /etc/eportal/config on a new host if it exists.

  • Copy $BASE_DIR/instance-id so our billing can know that the new ePortal was migrated and to avoid double billing.

  • Copy patch data $BASE_DIR/{arch,resources,user-resources} to a new host.

  • Set file owner. For RHEL-based distros:

[new-host ~]# chown -R nginx:nginx $BASE_DIR

For Debian-based distros:

[new-host ~]# chown -R eportal:eportal $BASE_DIR
  • Run migration /usr/share/kcare-eportal/migratedb.py --upgrade on a new host.

  • Start ePortal on the new host:

[new-host ~]# systemctl start eportal

Database backup

Create backup

kc.eportal utility have an option to create database backup

kc.eportal backup-db <path_to_directory> - creates backup in provided directory. If directory is not exists it will be created.

For example:

# kc.eportal backup-db /usr/share/kcare-eportal/db-backup_$(date '+%Y-%m-%d')

Recover from backup

You can replace existing databases (by default, in eportal home directory) with the backup files.

Warning!

IMPORTANT: ePortal should be stopped before replacing database files. Backup files should have owner and group nginx:nginx.

For example:

# systemctl stop eportal
# cp -f /path/to/backup_dir/* /usr/share/kcare-eportal/
# chown nginx:nginx /usr/share/kcare-eportal/*.sqlite*
# systemctl start eportal

Also, you need to check remote patchsource settings (Login, Password, Download URL in eportal UI), and after it download patches

# kc.eportal kcare download-missing
# kc.eportal libcare download-missing
# kc.eportal qemu download-missing
# kc.eportal db download-missing

Config files

  • ePortal config: /etc/eportal/config. Config for old versions (<1.35): /usr/share/kcare-eportal/local.py.
  • Web Server (nginx) config: /etc/nginx/conf.d/eportal.conf.
  • Data directory (RHEL based distros): /usr/share/kcare-eportal.
  • Data directory (Debian based distros): /var/lib/eportal.

Stopping & starting

To stop/start/reload/restart configuration of nginx server:

# systemctl stop|start|reload|restart nginx

To stop/start/restart ePortal (Python):

# systemctl stop|start|restart eportal

Log files

ePortal log: journalctl -u eportal

Nginx ePortal access log: /var/log/nginx/access.log

Nginx error log: /var/log/nginx/error.log

Log rotation

By default there is no predefined parameters for ePortal's logs rotation. If you want to enable it for the files listed above:

  • Install logrotate package
  • Create/edit /etc/logrotate.d/eportal configuration file

Example logrotate config:

/var/log/nginx/kcare-eportal.log {
    daily
    rotate 5 # keep 5 last archives
    missingok # it's ok if there is no such file
    notifempty # do nothing if file is empty
    compress
}

Nagios & Zabbix support

KernelCare.ePortal since version 1.2 supports server monitoring similar to Nagios & Zabbix monitoring.

You can curl the API directly to receive the information:

https://yourserver/admin/api/kcare/nagios/KCAREKEY

or you can use https://patches.kernelcare.com/downloads/nagios/check_kcare script by modifying KEY_KCARE_NAGIOS_ENDPOINT in it to point to your server (change https://cln.cloudlinux.com/clweb (link to old UI) or https://cln.cloudlinux.com/console/auth/login (link to new UI) with https://yourserver/admin ).

Note

Access using PARTNER_LOGIN/TOKEN is not supported by KernelCare.ePortal

Usage reports

In common case, usage reports are sending automatically but when it's not possible, ePortal will try to send report as an email. That requires configured Sendmail (SSMTP) on the host. You can find a short instruction below.

If mail sending attempt fails, ePortal will save the reports in /usr/share/kcare-eportal/reports which should be sent manually.

How to configure Sendmail (SSMTP)

First of all you need to install ssmtp:

# yum install -y ssmtp

Edit /etc/ssmtp/ssmtp.conf file in accordance with your SMTP server configuration. Here is a simple config file describing a common way to connect to Gmail accounts:

root=username@gmail.com
mailhub=smtp.gmail.com:587
hostname=localhost
UseSTARTTLS=YES
AuthUser=username@gmail.com
AuthPass=xxxxxxxxxxxxxxxxxxx
FromLineOverride=YES
TLS_CA_File=/etc/ssl/certs/ca-certificates.crt

Actual location of a TLS_CA_Files depends on Linux distribution:

"/etc/ssl/certs/ca-certificates.crt",                // Debian/Ubuntu/Gentoo etc.
"/etc/pki/tls/certs/ca-bundle.crt",                  // Fedora/RHEL 6
"/etc/ssl/ca-bundle.pem",                            // OpenSUSE
"/etc/pki/tls/cacert.pem",                           // OpenELEC
"/etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem", // CentOS/RHEL 7

Also you could get if from:

# curl-config --ca

Now you can test a connection:

$ echo -n 'Subject: test\n\nTesting ssmtp' | sendmail -v some-recipient@gmail.com

Custom environment variables

You can define your own environment variables for ePortal process.

There is the /usr/share/kcare-eportal/environment folder, which is basically daemon tools compatible envdir.

For example, to disable the default https verification you can set the PYTHONHTTPSVERIFY environment variable to 0 as follows:

# echo 0 > /usr/share/kcare-eportal/environment/PYTHONHTTPSVERIFY`

Authentication using Single Sign On

ePortal supports Single Sign On authentication by "OAuth 2.0" standard, "Authorization Code" flow.

SSO Configuration

To enable SSO you need to configure OAuth2 authentication service provider and ePortal.

Okta Application setup example

You set up your OpenID Connect application inside the Okta Admin Console:

  1. In the Admin Console, go to Applications > Applications.

  2. Click Create App Integration.

  3. On the Create a new app integration page, select OIDC - OpenID Connect for the Sign-in method and then select Web Application as the Application type.

  4. Fill in the Application Settings.

SettingValue
Sign-in redirect URIhttp://eportal_ip/admin/sso/login/callback
Sign-out redirect URIhttp://eportal_ip/admin
  1. Obtain Client ID, Client secret, the full URL to the /authorize, /token, /userinfo endpoints.

ePortal setup

On the ePortal machine, configure SSO settings.

Edit ePortal config file:

OIDC_AUTH_URL="https://dev-61441893.okta.com/oauth2/v1/authorize"
OIDC_TOKEN_URL="https://dev-61441893.okta.com/oauth2/v1/token"
OIDC_USERINFO_URL="https://dev-61441893.okta.com/oauth2/v1/userinfo"
OIDC_LOGOUT_URL="https://dev-61441893.okta.com/oauth2/v1/logout"

OIDC_CLIENT_ID="0Aa134lzhUKj8jDMo5d7"
OIDC_CLIENT_SECRET="AoBNuWRLRu2dxIR3Q0btO53N1entmGxBjQqwmjVL"

Restart ePortal (see the Stopping & Starting section, choose a corresponding OS).

If all settings configured correctly the new Sign In with SSO button has to appear on login page http://eportal_ip/admin/login

sso eportal

Custom patches storage

By default patches with databases are stored in /usr/share/kcare-eportal for RHEL-based systems and /var/lib/eportal for deb-based systems. You can configure it to use split storage, for example to keep patches on external block device.

Edit ePortal config file:

PATCHES_DIR = '/path/to/patches/storage'

Run:

# kc.eportal sync-nginx-conf

It initializes storage and makes corresponding modifications to nginx config to serve patches from a new place.

And restart nginx and eportal services to apply changes:

# systemctl restart eportal nginx